Related News

ATJ227X

 • ATJ227X is a highly integrated SOC for high density media solution with multiprocessor. The architecture of one 32-bit RISC up to 450 MHz, cooperated with a powerful Video Engine, a build in Graphics Processing Unit (GPU) and a Display Engine, high efficiency buses, high-speed DDR/DDRII/Mobile DDR memory controller. It can achieve high performance and low power dissipation.
 • ATJ227X is capable of dealing with all formats of video decoder, up to HD resolution, as well as all audio formats with a build in audio codec. And its video recorder can support up to 720p resolution. Audio/Video file can be played through HDMI, CVBS, YPbPr, 5.1 channel, SPDIF, IIS. ATJ227X also has RGB and CPU LCD interfaces with touch panel build-in. The integrated USB V2.0 (HS) SIE with OTG function enables the platform to act as a host or slave mass storage device at the speed up to 480Mbps. Nand Flash Controller, with build in 8bit/12bit/24bit/40bit ECC, randomizer for TLC nand support. 2-bit SPI Nor (SNor) Flash Controller, SD/MMC/MS card Controller and versatile peripheral serial interfaces (IIC, SPI*2, UART*2, IR, SPDIF, I2S), is able to support various memories, and such functions as Wi-Fi, LAN, Bluetooth, IRC is supported. Moreover, the build in Power Management Unit provides necessary system power and manage internal and external power dissipation to realize lower system cost.


 

          Detailed parameters
High Speed 32bit RISC    • Up to 450 MHz
    • 8-stage pipeline
    • MIPS32™ instruction set
    • Programmable Memory Management Unit
    • 16KB I-Cache and 16KB D-cache
    • 24kB DSPRAM
    • 8kB ISPRAM
Video Engine    • All format of 720p video supported, 30fps, up to 20Mbps averagely;
    • Support MPEG-4 encoding, up to 720p resolution
    • Support digital room from x1~x4, and with configurable step.
JPEG Codec    • Decoding/Encoding up to 4096*4096
    • Decoding Format: YCbCr4:2:2, YCbCr4:2:0
    • Encoding Format: YCbCr4:2:2, YCbCr4:2:0
 Graphics Processing Unit    • Completely compatible with Openvg 1.0
    • Hardware accelerated Pattern Tiling
    • Hardware accelerated FastFill
    • Hardware accelerated Affine Transform
    • Hardware accelerated Device Font
Display Engine    • Four moveable layers
    • Alpha blending and color space converting
    • Scalar
    • Dither function for 16 bit/18 bit interface LCD
    • Gamma correction
    • Video brightness, contrast and saturation adjustable
Memory Interface    • DDR/DDRII/M-DDR memory controller, x16 data bus, supporting up to 256MB, 200MHz max
    • Nand Flash controller with 8bit/12bit/24bit/40bit ECC, x8 data bus, 3.1V, supporting 2RB and 4CE, and hardware randomizer supported.
    • SPI Nor Boot Supported
Audio Engine    • All format of Audio decoding supported
    • Support MPEG-I decoding, 8~ 448kbps
    • Support WMA decoding, 5~383kbps
    • Support AAC/OGG/APE decoding
    • Several format of Audio encoding supported
LCD Controller    • Support CPU interface LCD
    • Support up to 24bit RGB interface
    • Programmable timing control for various panels
    • Support LCD resolution up to 1024*1024
HDMI    • HDMI 1.1, up to 720p resolution
    • Supports RGB, YCbCr format
    • Supports IEC60958 audio format up to 24bits
TV Out    • Support NTSC-M, -J and –4.43 modes.
    • Support PAL-B, -D, -G, -H, -I, -M, -N, -Nc mode
    • Support CVBS output
    • Support YPbPr/YCbCr output up to 720p resolution
    • Support outputting blue/black color and ColorBar when no data input
CMOS Sensor interface    • Support BT656&BT601 Interface
    • Support CMOS Sensor with YUV422 or RGB565 data format
    • With the CLKOUT for CMOS Sensor
USB    • Complies with OTG 2.0
    • Supports Session Request Protocol (SRP) and Host Negotiation Protocol (HNP).
    • Supports point-to-point communication with one low-speed, full-speed or high-speed device in Host mode
    • Supports full-speed or high-speed in peripheral mode, up to 480Mbps
Audio In/Out    • Build in stereo Sigma-Delta DAC, SNR>96dB
    • Build in stereo Sigma-Delta ADC, SNR>89dB
    • 18mW*2 Headphone Power Amplify, THD<-90dB
    • Support Microphone/FM (Linein) to ADC
SDIO    • Two 4-wire bus supported
    • Up to 8-wire for one bus
    • Support SD/HCSD/microSD/miniSD/MS memory card, MMC/RSMMC/MMC PLUS card
    • Support SDIO function
I2C    • 1-ch multi-master I2C bus, support both master and slave functions
    • Support standard mode (100kbps) and fast-speed mode (400kpbs)
UART    • 5-8 Data Bits and LSB first in Transmitting and receiving
    • 1-2 Stop Bits
    • Even, Odd, or No Parity
User Interface    • 1 remote control
    • 2*4 key matrix
    • Build in Touch Panel controller
    • IRC build in
SPI    • 2 seperated SPI controller
    • Each support master mode and slave mode. The speed of master mode up to 80Mbps, and slave up to 20Mbps.
    • Support dual I/O write and read mode as master
    • Support single data rate mode and double data rate(DDR mode) as master
    • Support two wire mode, only use SCLK and MOSI signal
I2S&SPDIF    • Support 5.1-Channel through I2S Transmitter module with Ext. 6-Channel DAC, include 3-Wire-DOUT Mode and TDM (time-division multiplexed) Mode
    • Support 5.1-Channel digital out through SPDIF
Timer/Clock    • 2 Timers
    • Alarm supported
    • Calendar supported
    • Two oscillator needed: 24MHz and 32.768KHz
 Chip ID    • Programmable for customer
PMU    • Programmable DC/DC converters and regulator
    • Battery charger, support Li+ battery.
    • Voltage detector for over current protection and temperature surveillance
    • Low Power Mode
    • Deep Sleep Mode
Low SOC power    • Low standby current. Less than 50uA with RTC.
    • Low power consumption. Less than 0.5mW/MHz of the CPU.
    • Dynamic system clock adjustment
Package    • LQFP176 E-PAD and LQFP128 E-PAD for different usage